Vortech Performance Parts and Accessories

Increase your 350's horsepower from 287 to 412 and torque from 274 to 355 with this complete supercharger kit. This kit features the V-2 SQ (super quiet) supercharger that offers quiet operation. Everything you need to install the system is included, as well as a high-flow fuel pump, fuel management unit(FCU), and reusable high-flow air filter.

• Boosts power to 412HP / 355TQ
• Features V-2 super-quiet supercharger

Gain 75-90HP(based on application) with this Vortech V-2 SQ supercharger system for GM trucks. This system features a nearly silent supercharger and includes fuel management upgrades and a hand-held ECM re-programmer.

• Features V-2 super-quiet supercharger
• Includes fuel management upgrade

The NOVI SL (Self-Lubricating) Supercharger features an internal oil reservoir for self-contained lubrication - no oil lines are necessary. This kit contains everything you need to add up to 100hp to your stock 4.6L Mustang.

• Increases output to 364HP / 371TQ
• Self-lubrcated

This is the official Vortech supercharger oil.

• Extends supercharger life
• Spout tip included

Increase your 350z's horsepower from 300 to 440 and torque from 260 to 352 with this complete supercharger kit. This kit features the V-2 SQ (super quiet) supercharger that offers quiet operation. Everything you need to install the system is included, as well as a high-flow fuel pump, fuel management unit(FCU), and reusable high-flow air filter Note: Some of these systems may bolt-on to automatic transmission equipped vehicles, however, the transmission may need to be in manual shift mode to avoid engaging the rev limiter. The G35 sedan system will not bolt onto Automatic models. At minimum, a custom supercharger discharge tube (not available from Vortech) would be required to clear the mechanical fan. Charge air cooler mounting is possible, but complicated by the addition of a front mount electric fan.

• Boosts power to 440HP / 352TQ
• Features V-2 super-quiet supercharger

This is an updated, universal supercharging system designed for vehicles with carbureted small block Chevrolet engines. Horsepower gains depend on boost levels, engine efficiency, etc., but can be increased from 30-75%. This kit offers improved application flexibility, increased supercharger mount rigidity and simple integration with existing OEM drive configurations. Installation time varies depending on application, but can range from 4-10 hours. This system has been verified to fit on 1970-1973 Camaro/Firebird (w/cowl hood), 1964-1972 Chevelle and 1955-1957 sedan (BelAir/210 etc.) and 1968-1973 Nova/Chevy II. Includes cast aluminum carburetor enclosure assembly for use with Holley #4150 or Demon 750 MD carburetor.

• Features V-2 super-quiet supercharger
• High-flow, reusable air filter

Get large blower performance in a smaller package with this Vortech V-7 YSi-Trim Racing Supercharger. Create up to 1200hp with 30psi of boost. Low-friction impeller seal allows for _upstream” throttle or draw- through applications Superchargers exceeding 6 PSI require a Vortech standard bypass valve or a Vortech Maxflow racing bypass valve. Superchargers exceeding 10 PSI require a Vortech Maxflow Mondo or Maxflow racing bypass valve. Cog belt drive systems are recommended for all heavy duty superchargers.

• Does not include drive pulley
• For highly modified racing engines

The NOVI SL (Self-Lubricating) Supercharger features an internal oil reservoir for self-contained lubrication - no oil lines are necessary. This kit contains everything you need to add up to 100hp to your stock 4.6L Mustang.

• Increases output to 364HP / 371TQ
• Polished finish

Give your Mustang a streetable 170 horsepower boost with this Paxton supercharger for the 2005-2010 Ford Mustang 4.6L. This bolt-on package features the NOVI 2200 gear-driven centrifugal supercharger complete with integrated air/air charge cooler.

• 9.5-10.5psi boost, horsepower increase varies
• Charge cooler is included

Add up to 75% more horsepower to your Small Block Chevy at a bargain price with this entry level supercharger kit, featuring the Vortech PowerHat with diffusion technology. Horsepower gains (depending on boost levels, engine volumetric efficiency etc.) are typically 30-75 percent or more. This universal supercharger kit is designed for vehicles equipped with carbureted small block Chevrolet engines. It integrates with many existing OEM drive configurations. This kit requires the installer to supply a high volume fuel pump and properly jetted Holley 4150-type carburetor unit (with mechanical secondaries). Minor (bottom-side) hood support modifications may be required depending upon the vehicle and type of intake manifold installed on the engine. Most OEM Saginaw type power steering pumps can be attached to the Vortech mounting bracket using the supplied hardware in the kit.

• Economically priced entry level kit
• Gain 30-70 percent more power