Browse Vortech Engine Components for Your Vehicle

The NOVI SL (Self-Lubricating) Supercharger features an internal oil reservoir for self-contained lubrication - no oil lines are necessary. This kit contains everything you need to add up to 120hp to your stock 4.6L Mustang.

• Increases output to 420HP / 385TQ
• Self-lubrcated

For late model 6.1L (SRT8) vehicles - Chrysler 300C, Dodge Magnum, Charger and Challenger. This complete kit increases horsepower from 425 to 560, and increases torque from 420 to 510 at 7.5-8.5 PSI. Includes Vortech's V3 self-lubricated supercharger, fuel management upgrades, and a DiabloSport Predator programmer.

• Increases power to 560HP / 510TQ
• Integrated dual-pass air/water charge cooler

Add an incredible 162HP to your 4.6L Mustang GT with this High Output supercharger system from Vortech. Included is a Vortech V-2 Super Quiet supercharger and everything you need for a complete installation, including a high-flow fuel pump, high-capacity fuel injectors, and a DiabloSport Predator programmer to re-flash the factory computer. Integrated air/water, dual-pass charge cooler configuration allows for maximum horsepower.

The complete supercharger system features Vortech's V-3 Si-Trim self-lubricating supercharger adds 47% more horsepower to boost your stock 2010-11 Camaro to a total of 625HP with 6.5-7.5 PSI at the stock redline. Fuel management upgrades are included, as well as all hoses and brackets needed for installation.

This Lysholm 2300 twin-screw supercharger has a 3.80in pulley, integrated bypass valve and actuator. The twin-screw design provides maximum low-end torque as well as much greater efficiency and horsepower gains than the traditional (as well as newer) roots type blowers. System includes fuel system upgrades and DiabloSport Predator programmer.

• 452HP and 444 lb/ft
• DiabloSport Predator programmer included

Increase your 350's horsepower from 287 to 412 and torque from 274 to 355 with this complete supercharger kit. This kit features the V-2 SQ (super quiet) supercharger that offers quiet operation. Everything you need to install the system is included, as well as a high-flow fuel pump, fuel management unit(FCU), and reusable high-flow air filter.

Power up your HEMI Cherokee with this supercharger kit from Vortech. Thy V-3 Si-Trim CCW rotation supercharger is self lubricated and features an extended 6-rib belt and secondary cog drive. This reliable, closed-loop air/water charge air cooler increases performance of your Jeep by adding an incredible 140 horsepower and 90lb/ft of torque. This supercharger drive system includes all necessary belts and pulleys, as well as a billet aluminum mounting plate assembly mounts the supercharger and power steering pump. Includes fuel management upgrades and DiabloSport Predator programmer.

This Paxton Novi 2200 Supercharger System for the 2007-2008 Mustang GT creates 9-10lbs of boost and helps your 'stang produce 470 HP and 420 lb/ft torque. This system includes an air-to-air intercooler and a DiabloSport hand-held programmer to custom tune your air and fuel systems. Click to download Paxton catalog for complete information.

This Paxton Novi 2200 Supercharger System for the 2007-2008 Mustang GT creates 9-10lbs of boost and helps your 'stang produce 470 HP and 420 lb/ft torque. This system includes an air-to-air intercooler and a DiabloSport hand-held programmer to custom tune your air and fuel systems. Click to download Paxton catalog for complete information.

• DiabloSport Predator programmer included
• Includes high-flow fuel injectors and fuel pump

This Vortech blow-through carbureted supercharger system provides a boost in horsepower ranging from 30% to over 75% depending on boost level. The V-7 YSi-Trim compressor has a 3.33in diameter 10-Rib pulley. Also included are a 3/8in thick, nickel plated, supercharger mounting plate, cast aluminum mounting bracketry/hardware and 3.5in diameter cast aluminum discharge duct assembly with heat resistant silicon sleeves and premium stainless steel clamps. This system also features a 7in diameter, 10-Rib, 6061-T6 billet aluminum supercharger crank pulley, three-groove, accessory drive crank pulley, pulley spacer and integrated manual belt tensioner with dual bearing tensioner pulley. This replaces part number GA218028.