Browse Exhausts for Your Vehicle

Ceramic Header, Primary Tube Coll. Size 1 5/8x2.5 in., w/o AIR Tubes, Modify Stck Exh. To Retain Cat. Converter, Not Legal For Street Use

• Ceramic Headers
• Fuel Economy From The Engine

• Must Remove The Rubber Stopper Below The Starter
• Must Remove The Rubber Stopper Below The Starter On 4WD Only
• Req. A/C Bracket PN[10042FLT]
• w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5in Flng/PN[10110FLT] For 3in

Ceramic Header, Primary Tube Coll. Size 1.75x3 in., Modify Stock Exh. To Retain Cat. Converter, Not Legal For Street Use

• Ceramic Headers
• Fuel Economy From The Engine

• Must Use Original Factory Big Block Engine Frame Mounts & Hardware

Elite Hedders, Exhaust Header, Tube Size 1.75 in., Collector Size 3 in., Tubular Exhaust Manifold System, Square Port, w/o Smog Injection/Injection Header

• And Stands Up Better Against Brutal Punishment
• Ceramic Metallic Coating Stands Temp. Up To 1400 F

• 16 Gauge Tubing
• Elite Replacement Gasket PN[27520]
• Elite Replacement Gasket PN[27550]
• Hedder Has Been Submitted to CA. Air Resources Board For Approval
• Includes Parts Necessary To Retain Emission Devices (50 States)
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Must Use 1975 And Later Model Clutch Linkage Located At Rear Of Engine
• Must Use Factory Big Block Hardware And Mounts
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles
• Pending Approval The E.O. Number Should Be Available Soon
• Will Not Fit 727 Torqueflite Transmission

Street Rod Block Hugger, Exhaust Header, Tube Size 1 5/8 in., Collector Size 2.5 in., Shortie Style, Chevy Street Rod 283-400 Engine, HTC Finish

• Computerized Precision
• Durable And Affordable

• Shorty Header; Maximum Clearance
• Will Fit With Angle Plug Heads/Chevy Aluminum Only

Ceramic Header, Primary Tube Coll. Size 1.5x3 in., Can Be Modified To Fit A.I.R. Fittings In Head, Will Not Fit C6 Trans., Not Legal For Street Use

• Ceramic Headers
• Fuel Economy From The Engine

• Power Steering Equipped; Use Power Steering Pump Bracket PN[10041FLT]

Elite Hedders, Exhaust Header, Tube Size 1 5/8 in., Collector Size 3 in., Tubular Exhaust Manifold System, w/o Smog Injection Or Injection Heads

• And Stands Up Better Against Brutal Punishment
• Ceramic Metallic Coating Stands Temp. Up To 1400 F

• Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port
• Elite Replacement Gasket PN[27520]
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Must Modify Rotary A/C Bracket
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles
• Use PN[69092] Without AIR
• Use PN[69093] with AIR

Elite Hedders, Exhaust Header, Tube Size 1 5/8 in., Collector Size 3 in., w/o Smog Injection Or Injection Heads, Shortie Style, 49 State Legal

• And Stands Up Better Against Brutal Punishment
• Ceramic Metallic Coating Stands Temp. Up To 1400 F

• Elite Replacement Gasket PN[27520]
• Large Piston AC Compressors Require PN[20110]
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Must Modify Rotary A/C Bracket
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles
• Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles
• Shorty Header; Maximum Clearance
• Will Fit With Angle Plug Heads/Chevy Aluminum Only
• Will Not Fit Saginaw P/S 825 Series
• With A.I.R System

Ceramic Header, Primary Tube Coll. Size 1 5/8x3 in., w/O2 Sensor Fitting, Equal Length Tuned Style, Not Legal For Street Use

• Ceramic Headers
• Fuel Economy From The Engine

• Will Fit w/Dart/Windsor Cylinder Heads

Elite Hedders, Exhaust Header, Tube Size 1 5/8 in., Collector Size 3 in., Engine Offset To Passenger Side, w/o Smog Injection/Injection Heads

• And Stands Up Better Against Brutal Punishment
• Ceramic Metallic Coating Stands Temp. Up To 1400 F

• Designed For Use With A Trans-Dapt Throttle Body Spacer
• Elite Replacement Gasket PN[27520]
• Engine Offset To Passenger Side Of Vehicle
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Must Modify Rotary A/C Bracket
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles

Shorty, Smog Headers, Ceramic, w/o A.I.R., 50 States Emissions Legal

• 16-Gauge Tubing For Durability
• Bolt On Quickly And Easily

• Fits Where Drivers Side Manifold Has Its Exit Rear Of The Rear Exhaust Port
• Stock Replacement; Bolts Directly To Factory Headpipes
• Will Not Fit w/A.I.R. Injection Pump
• Will Work With Factory Exhaust System