Browse Exhaust Headers

Super Comp. Header, Black Finish, Full Lgth., Tube 1.75 in. x 26 in. OD, Coll. Size 3 in. OD, Coll. Lgth. 15 in., Port Shape Same As Port, Fits w/Angle Plug Heads

• Keep Top End Horsepower
• Long Transition Collectors

• Emissions Code 3-Amber; Legal Only For Off-Highway/Racing Use
• Will Not Fit w/Heater

Competition Header, Stainless Steel, Tube Size 1 5/8 in. OD, Coll. Size 3 in. OD, Coll. Lgth. 4 in., Port Shape Same As Port, Fits Angle Plug Heads

• Affordable
• Durable 16 Gauge Material

• Emissions Code 3-Amber; Legal Only For Off-Highway/Racing Use
• Equipped w/ a Fitting To Accept The Stock Oxygen Sensor

HTC Hedders, Exhaust Header, Tube Size 1 5/8 in., Coll. Size 3 in. ,w/o Smog Injection Or Injection Heads

• Best High Temp Coating On The Market Today
• Better Heat Insulation

• Designed For Use With A Trans-Dapt Throttle Body Spacer
• Elite Replacement Gasket PN[27520]
• Hedder Has Been Submitted to CA. Air Resources Board For Approval
• Includes Parts Necessary To Retain Emission Devices (50 States)
• Large Piston AC Compressors Require PN[20110]
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Must Modify Rotary A/C Bracket
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles
• Pending Approval The E.O. Number Should Be Available Soon
• Will Fit With Angle Plug Heads/Chevy Aluminum Only

Hedder Kit, Tube Size 1 5/8 in., Collector Size 3 in., 67-87 C10/C20 Trucks w/SB Chevy, Uncoated Headers, MID-LENGTH Design

• 3/8 Thick Head Flanges
• Hardware And Gaskets Included

Shorty, Smog Headers, Standard, w/o A.I.R., 50 States Emissions Legal

• 16-Gauge Tubing For Durability
• Bolt On Quickly And Easily

• Stock Replacement; Bolts Directly To Factory Headpipes
• Will Work With Factory Exhaust System

Painted Hedders, Exhaust Header, Tube Size 1 5/8 in., Collector Size 3 in., w/o Smog Injection Or Injection Headers, w/Angle Plug Heads

• Computerized Precision
• Durable And Affordable

• Elite Replacement Gasket PN[27520]
• Large Piston AC Compressors Require PN[20110]
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles
• Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles
• Will Fit With Angle Plug Heads/Chevy Aluminum Only
• Will Not Fit With Steering Damper Inside Front Crossmember.

Super Comp. Block Hugger Header, Black Finish, Chevy Small Block 262-400 Eng., Tube Size 1 5/8 in. OD, Coll. Size 2.5 in. OD, Coll. Lgth 4 in., Port Shape Round

• Allow Maximum Ground Clearance
• Collector Reducers

• Emissions Code 3-Amber; Legal Only For Off-Highway/Racing Use
• Will Fit Corvette D-Port Aluminum Angle Plug Heads

Competition Header, Metallic Ceramic Coating, Tube Size 1 5/8 x 30 in. OD, Coll. Size 2.5 in. OD, Coll. Lgth. 8 in., Port Shape Same As Port, Will Not Fit Angle Plug Heads

• Affordable
• Durable 16 Gauge Material

• Emissions Code 3-Amber; Legal Only For Off-Highway/Racing Use
• Reducers Available w/Oxygen Sensor PN[11045HKR/11046HKR]

Afterburner, Headers, Standard, w/o A.I.R. Tubes, Modify Stock Exh. To Retain Cat. Converter, Not Legal For Street Use

• Formed From Stainless Steel
• Increase Horsepower/Torque

• Must Remove The Rubber Stopper Below The Starter
• Must Remove The Rubber Stopper Below The Starter On 4WD Only
• Req. A/C Bracket PN[10042FLT]
• w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5in Flng/PN[10110FLT] For 3in

Painted Hedders, Exhaust Header, Tube Size 1 5/8 in., Collector Size 3 in., Tubular Exhaust Manifold System, w/o Smog Injection Or Injection Heads

• Computerized Precision
• Durable And Affordable

• Clutch Shaft Interference When Cross Shaft Under Drivers Side Exhaust Port
• Early Chassis Only
• Elite Replacement Gasket PN[27520]
• Large Piston AC Compressors Require PN[20110]
• Legal Only For Racing Vehicles Which May Never Be Used Upon A Highway
• Modification To Stock Exhaust Required To Retain Catalytic Converter
• Must Modify Rotary A/C Bracket
• Not Legal For Sale Or Use In California On Pollution Controlled Vehicles
• This Model Is Recommended For Use With Lift Kits
• Use PN[69092] Without AIR
• Use PN[69093] with AIR