Browse Ignition Boxes for Your 1993 Gmc K1500 Pickup SIERRA

HI-6S, Ignition, Incl. PS91 Coil Kit PN[730-0091]

• Built In Adjustable Rev Limiter 3100 - 9900 RPM
• Inductive Ignition w/Long Duration Spark

• For Boost Proportional Control Use MAP Sensor PN[9000-0110]
• If Replace Module Or Use Mag Trigger On Non-Computer Control PN[6000-6400]
• Use Electronic Trigger PN[6000-8931]
• Use Harness PN[6000-6707]
• Use Harness PN[6000-6708]
• Use Timing Retard Control PN[6000-6425] With MAP Sensor PN[9000-0110]

HI-6, CD Multi-Spark Ignition, Incl. Plug-N-Go Universal Harness, Black

• Built In Flashing Codes For System Problems
• Exclusive Cross-Fire Protection

• For Boost Proportional Control Use MAP Sensor PN[9000-0110]
• For Boost Proportional Timing Retard Control Use PN[6000-6446]
• For Boost Proportional Timing Retard Use Map Sensor PN[9000-0110]
• If Replace Module Or Use Mag Trigger On Non-Computer Control PN[6000-6400]
• Must Convert Stock Coil In Cap Distributor To Use Remote Coil
• Requires Optical Trigger PN[715-0020/700-2231/700-2226]
• Requires Optical Trigger PN[715-0020/700-2231/700-2292]
• Requires Optical Trigger PN[715-0020/700-2231/700-2300]
• Requires PN[715-0020/700-2226]
• Requires PN[715-0020/700-2231/700-2300/700-2226]
• Requires PN[715-0020/700-2231/700-2300]
• Requires PN[715-0020/700-2231]
• Requires PN[715-0200/700-2231/700-2292]
• Requires Tach Adaptor PN[6000-8910]
• Tach Adapter PN[6000-8910] Required
• Tach Adaptor PN[6000-8910] Req.If Not Using ElectronicTrigger PN[6000-8931]
• Use Conversion Kit PN[700-2226] Single Points w/Optical TriggerPN[715-0020]
• Use Conversion Kit PN[700-2231] Dual Points w/Optical Trigger PN[715-0020]
• Use Conversion Kit PN[700-2292] & Optical Trigger PN[715-0020] Replaces O.E
• Use Electronic Trigger PN[6000-8931]
• Use Electronic Trigger PN[6000-8931] w/LT1 Type Optispark Distributors
• Use Harness PN[6000-6707]
• Use Harness PN[6000-6708]
• Use Optical Trigger PN[715-0020]
• Use Optical Trigger PN[715-0020] For Optimal Performance
• Use Points Conversion Kit PN[700-2226] And Optical Trigger PN[715-0020]
• Use Points Conversion Kit PN[700-2226] For Top Advance Weight
• Use Points Conversion Kit PN[700-2231] And Optical Trigger PN[715-0020]
• Use Points Conversion Kit PN[700-2231] Except Dual Points
• Use Points Conversion Kit PN[700-2231] For Bottom Advance Weight
• Use Timing Retard Control PN[6000-6425] With MAP Sensor PN[9000-0110]

HI-6TRC, Racing CD Ignition, Incl. Timing Retard

• 0 - 20 Degree Driver Adjustable Timing Retard
• Built In Flashing Codes To Check For Problems

• All Fuel Injected Models Require Adapter PN[6000-8910/6000-8931]
• For Boost Proportional Control Use MAP Sensor PN[9000-0110]
• Module Should Have Three Wires. If Two Wires Use PN[6000-6400]
• Must Convert Stock; Coil In Cap Distributor
• Requires Optical Trigger PN[715-0020/700-2231/700-2226]
• Requires PN[715-0020/700-2226]
• Requires PN[715-0020/700-2231/700-2292/700-2226]
• Requires PN[715-0020/700-2231/700-2300/700-2226]
• Requires PN[715-0020/700-2231/700-2300]
• Requires PN[715-0020/700-2231]
• Requires PN[715-0020/700-2292]
• Requires PN[715-0200/700-2231/700-2292]
• Requires Tach Adaptor PN[6000-8910]
• Tach Adapter PN[6000-8910] Required
• Tach Adaptor PN[6000-8910] Req.If Not Using ElectronicTrigger PN[6000-8931]
• Use Conversion Kit PN[700-2226] Single Points w/Optical TriggerPN[715-0020]
• Use Conversion Kit PN[700-2231] Dual Points w/Optical Trigger PN[715-0020]
• Use Conversion Kit PN[700-2292] & Optical Trigger PN[715-0020] Replaces O.E
• Use Electronic Trigger PN[6000-8931]
• Use Harness PN[6000-6707]
• Use Harness PN[6000-6708]
• Use Optical Trigger PN[715-0020] For Optimal Performance
• Use Points Conversion Kit PN[700-2226] And Optical Trigger PN[715-0020]
• Use Points Conversion Kit PN[700-2226] For Top Advance Weight
• Use Points Conversion Kit PN[700-2231] And Optical Trigger PN[715-0020]
• Use Points Conversion Kit PN[700-2231] For Bottom Advance Weight
• Use Timing Retard Control PN[6000-6425] With MAP Sensor PN[9000-0110]

HI-6S, Ignition, Ignition Only

• Built In Adjustable Rev Limiter 3100 - 9900 RPM
• Inductive Ignition w/Long Duration Spark

• For Boost Proportional Control Use MAP Sensor PN[9000-0110]
• For Boost Proportional Timing Retard Control Use PN[6000-6446]
• For Boost Proportional Timing Retard Use Map Sensor PN[9000-0110]
• If Replace Module Or Use Mag Trigger On Non-Computer Control PN[6000-6400]
• If Using Crane CD Ignition Rotor Must Be Changed
• Module Should Have Three Wires. If Two Wires Use PN[6000-6400]
• Must Convert Stock Coil In Cap Distributor To Use Remote Coil
• Must Convert Stock; Coil In Cap Distributor
• Optical Trigger Conversion Replacing Stock Pickup
• Requires Optical Trigger PN[715-0020/700-2231/700-2226]
• Requires Optical Trigger PN[715-0020/700-2231/700-2292]
• Requires PN[715-0020/700-2231/700-2292/700-2226]
• Requires PN[715-0020/700-2231/700-2300/700-2226]
• Requires PN[715-0020/700-2231/700-2300]
• Requires PN[715-0020/700-2231]
• Requires PN[715-0200/700-2231/700-2292]
• Requires Tach Adaptor PN[6000-8910]
• Resistor Type Ignition Rotor Should Be Replaced With Non Resistor Type
• Use Conversion Kit PN[700-2292] & Optical Trigger PN[715-0020] Replaces O.E
• Use Electronic Trigger PN[6000-8931]
• Use Harness PN[6000-6707]
• Use Harness PN[6000-6708]
• Use Optical Trigger PN[715-0020] For Optimal Performance
• Use Points Conversion Kit PN[700-2226] And Optical Trigger PN[715-0020]
• Use Points Conversion Kit PN[700-2226] For Top Advance Weight
• Use Points Conversion Kit PN[700-2231] And Optical Trigger PN[715-0020]
• Use Points Conversion Kit PN[700-2231] For Bottom Advance Weight
• Use Timing Retard Control PN[6000-6425] With MAP Sensor PN[9000-0110]