Browse Trailer Hitches & Parts for Your 1997 Ford Ranger Base/Standard

Multi-Fit Receiver

• Multi-Fit Receiver

• 2WD Models Only.
• Drilling Required
• Hitch Crosstube Is Visible Beneath Bumper
• Includes Models With Large Fuel Tank And Skid Shield
• Install Time 30 min.
• Install Time 35 min.
• Install Time 40 min.
• Install Time 60 min.
• Minor Heat Shield Modification May Be Required
• No Drilling Required
• Requires OEM Factory Bumper For Hitch Installation
• Will Not Fit 2WD Short Bed
• Will Not Fit Long Bed Models After 1999
• Will Not Fit Models w/Short Bed
• With Sport Bumper

Front Mount Receiver, 500 Lbs. Tongue Weight-Weight Carrying, 9000 Lbs. Maximum Winch Line Pull

• Front Mount Receiver

Class III/IV, Max-Frame, Trailer Hitch, Rear, 2 in. Rec., 4000lbs. GTW/6000lb Wt. Dist,400lbs. Tongue Wt/750lb Wt. Dist., w/Factory Installed Step Bumper Only, Drill Req.

• All Frame Attachments
• Black Powered Coat Finish

• 19mm Open End Style Wrench Must Be Used To Remove Spare Tire After Hitch In
• For Vechiles w/Factory Installed Step Bumpers Only
• Hitches Produced Before 07/21/06 Are Rated At 350/3500 WC
• Install Time 20 min.

Class III, Pro Series Trailer Hitch, Hitch Only, 2 in. Receiver, 3500 lb. GTW/5000 lb. Wt. Distributing, 300 lb. Tongue Wt./500 lb. Wt. Distributing, Drilling Required, Rear

• Class III; Pro Series Trailer Hitch

• 19mm Open End Style Wrench Must Be Used To Remove Spare Tire After Hitch In
• For Vechiles w/Factory Installed Step Bumpers Only
• Install Time 20 min.