Valve Spring and Retainer Kit, Qty. 1, Contents, [99848-16] Valve Springs, [99915-16] Retainers

• Installed w/No Cylinder Head Machining Necessary
• Kits Offer Matched Valve Springs/Retainers Needed

• For Vehicles With 1.7 in. Assembly Height
• No Matching To Install
• Standard Diameter Valve Springs; No Machining Required

Chrome Moly Steel Performance Pushrod, 5/16 in. Dia., 7.765 in. Length, Ball Ends, 16 pc.

• Ends Are Carburized; Heat Treated For Strength
• For Use With or Without Pushrod Guideplates

• For Non-Guideplate Cylinder Heads

Chrome Moly Steel Performance Pushrod, 5/16 in. Dia., 7.765 in. Length, Ball Ends, Heat Treated, 16 pc.

• Ends Are Carburized; Heat Treated For Strength
• For Use With or Without Pushrod Guideplates

Chrome Moly Steel Performance Pushrod, 5/16 in. Dia., 7.793 in. Length, Ball Ends, Heat Treated, 16 pc.

• Ends Are Carburized; Heat Treated For Strength
• For Use With or Without Pushrod Guideplates

• For Use With Or Without Pushrod Guideplate Cylinder Heads

Energizer Hydraulic Lifter Set, 16 pc.

• Energizer Hydraulic Lifter

Valve Stem Lock, Qty. 1, Single Groove Design, Stamped Steel 7deg., For 11/32 in. Dia. Valve Stem, Black

• Excellent For Street-Perf/Mod Racing Engine Appl

Valve Stem Lock, Qty. 1, Single Groove Design, Heat Treated, Machined Steel 7deg., For 11/32 in. Dia. Valve Stem, Standard Installed Height, Black

• Locks Used With Posi Lock Valve Spring Retainer
• Machined From Quality Alloy Steel Billet Material

Single Valve Spring, OD 1.255, ID 0.870, Use w/Hydraulic Or Mechanical Cam, w/Damper, For 1.7 in. Assembly Height, 16 pc.

• Installed w/o Machining Or Removal Of Cylinder Hds
• Made From H-11 Tool Steel

• For Vehicles With 1.7 in. Assembly Height
• Standard Diameter Valve Springs; No Machining Required

Single Valve Spring, OD 1.255, ID 0.870, Use w/Hydraulic Or Mechanical Cam, w/Damper, For 1.7 in. Assembly Height, 2 pc.

• Installed w/o Machining Or Removal Of Cylinder Hds
• Made From H-11 Tool Steel

• For Vehicles With 1.7 in. Assembly Height
• Standard Diameter Valve Springs; No Machining Required

Valve Spring Ret., 7deg. Steel, .344 in. Valve Stem Dia, OD Outer Spring 1.203 in., ID Outer Spring .867 in., ID Inner Spring .607 in., H Comparison -.015 in., 16 pc.

• Heat Treat Hardened For Strength and Durability
• Retainers Are Designed To Correctly Fit Springs

• Standard Diameter Valve Springs; No Machining Required

Valve Spring Ret., 7deg. Steel, .344 in. Valve Stem Dia, OD Outer Spring 1.203 in., ID Outer Spring .867 in., ID Inner Spring .607 in., H Comparison -.015 in., 2 pc.

• Heat Treat Hardened For Strength and Durability
• Retainers Are Designed To Correctly Fit Springs

• For Vehicles With 1.7 in. Assembly Height
• Standard Diameter Valve Springs; No Machining Required

Gold Race Extruded Roller Rocker, Qty. 1, Non Self Aligning, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, 1.5 Ratio, 3/8 in. Stud

• For Most Domestic Engines
• Heat Treated Extruded Billet Aluminum

• For Center Bolt Valve Covers
• For Eng. w/Self-Aligning Rockers Check Valve Cover Clearance
• For Eng. w/Self-Aligning Rockers Install Hardened Pushrod Guideplates
• For Eng. w/Self-Aligning Rockers Install Heat-Treated Pushrods

Gold Race Extruded Roller Rocker, Qty. 16, Non Self Aligning, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, 1.5 Ratio, 3/8 in. Stud

• For Most Domestic Engines
• Heat Treated Extruded Billet Aluminum

• For Center Bolt Valve Covers
• For Eng. w/Self-Aligning Rockers Check Valve Cover Clearance
• For Eng. w/Self-Aligning Rockers Install Hardened Pushrod Guideplates
• For Eng. w/Self-Aligning Rockers Install Heat-Treated Pushrods

Gold Race Extruded Roller Rocker, Self Aligning, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, 1.5 Ratio, 3/8 in. Stud, 1 pc.

• For Most Domestic Engines
• Heat Treated Extruded Billet Aluminum

• Convert To 0.375 in. Studs By Installing Six PN[99148-2] Rocker Arm Studs
• For Center Bolt Valve Covers
• For Non-Guideplate Cylinder Heads
• For Use w/o Pushrod Guideplates

Gold Race Extruded Roller Rocker, Self Aligning, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, 1.5 Ratio, 3/8 in. Stud, 16 pc.

• For Most Domestic Engines
• Heat Treated Extruded Billet Aluminum

• For Center Bolt Valve Covers
• For Non-Guideplate Cylinder Heads
• For Use w/o Pushrod Guideplates

Valve Spring and Retainer Kit, Qty. 1, Contents, [99848-16] Valve Springs, [99915-16] Retainers

• Installed w/No Cylinder Head Machining Necessary
• Kits Offer Matched Valve Springs/Retainers Needed

• For Vehicles With 1.7 in. Assembly Height
• No Matching To Install
• Standard Diameter Valve Springs; No Machining Required

Energizer Rocker Arm, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, Non Self-Aligning, 1.5 Ratio, 3/8 in. Stud, 1 pc.

• Die Formed Aluminum Body
• For Street And Moderate Race Use

• Convert To 0.375 in. Studs By Installing Six PN[99148-2] Rocker Arm Studs
• For Eng. w/Self-Aligning Rockers Check Valve Cover Clearance
• For Eng. w/Self-Aligning Rockers Install Hardened Pushrod Guideplates
• For Eng. w/Self-Aligning Rockers Install Heat-Treated Pushrods
• Valve Train Stabilizer Available
• Will Not Have Sufficient Clearance In Factory Cast Valve Covers

Energizer Rocker Arm, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, Non Self-Aligning, 1.5 Ratio, 3/8 in. Stud, 16 pc.

• Die Formed Aluminum Body
• For Street And Moderate Race Use

• For Eng. w/Self-Aligning Rockers Check Valve Cover Clearance
• For Eng. w/Self-Aligning Rockers Install Hardened Pushrod Guideplates
• For Eng. w/Self-Aligning Rockers Install Heat-Treated Pushrods
• Valve Train Stabilizer Available
• Will Not Have Sufficient Clearance In Factory Cast Valve Covers

Gold Race Extruded Roller Rocker, Non-Self Aligning, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, 1.5 Ratio, 3/8 in. Stud, 1 pc.

• For Most Domestic Engines
• Heat Treated Extruded Billet Aluminum

• Convert To 0.375 in. Studs By Installing Six PN[99148-2] Rocker Arm Studs
• Factory Cast Valve Covers May Require Internal Clearance
• For Eng. w/Self-Aligning Rockers Check Valve Cover Clearance
• For Eng. w/Self-Aligning Rockers Install Hardened Pushrod Guideplates
• For Eng. w/Self-Aligning Rockers Install Heat-Treated Pushrods
• Valve Train Stabilizer Available

Gold Race Extruded Roller Rocker, Non-Self Aligning, Stock Ratio, Aluminum w/Needle Bearing Fulcrum, Roller Tip, 1.5 Ratio, 3/8 in. Stud, 16 pc.

• For Most Domestic Engines
• Heat Treated Extruded Billet Aluminum

• Factory Cast Valve Covers May Require Internal Clearance
• For Eng. w/Self-Aligning Rockers Check Valve Cover Clearance
• For Eng. w/Self-Aligning Rockers Install Hardened Pushrod Guideplates
• For Eng. w/Self-Aligning Rockers Install Heat-Treated Pushrods
• Valve Train Stabilizer Available

Die-Formed Steel Rocker Arm, Qty. 1, Non Self-Aligning, Ratio 1.5, Stud Dia. 3/8 in., Factory Performance Replacement w/Long Slot

• Heat Treated
• Stock Design

• Not For Use w/Valve Springs Over 1.520 in. O.D.

Die-Formed Steel Rocker Arm, Qty. 16, Non Self-Aligning, Ratio 1.5, Stud Dia. 3/8 in., Factory Performance Replacement w/Long Slot

• Heat Treated
• Stock Design

• Not For Use w/Valve Springs Over 1.520 in. O.D.

Roller Type Timing Chain Set, Qty. 1, Performance Steel Billet Gear, CNC Machined Sprockets, Thrust Washer

• Friction Reduction And Wear Resistance
• Nine Separate Keyway Locations

Roller Type Timing Chain Set, Qty. 1, Multi-Keyway, All Metal

• Friction Reducing Features Of A Roller Type Chain
• Multi Keyways Allows to Advance or Retard The Cam

Assembly Lube, Qty. 1, Paste, 2 - 1 oz. Packages

• 2 One Ounce Packages
• Assembly Lube

Assembly Lube, Qty. 1, Paste, 1 lb. Container

• 1 Pound Container
• Assembly Lube